Forward Controls Design - OPF-G RMR Mounting Plate

The Forward Controls Design - OPF-G RMR Mounting Plate is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02.  Glock's OEM MOS plate's width matches that of the slide, but OPF-G, RMR is already wider to fully support the RMR, thus it is compatible with all MOS equipped Glock slides.

OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what Glock MOS plates uses), and sight to plate screws (6/32 x 3/8), a T10 key and a VC3 packet.

• Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement. 
• Eliminate the need to use an additional sealer plate.
• Correct length sight to plate, and plate to slide screws.  Screws are to be Torx.
• Adapter plate is to be machined in steel.
• Weight: 0.83oz
• Plate to slide torque value: 13 to 15in/lb
• Sight to plate torque value: 13in/lb

What's in the Box?

• OPF-G RMR Mounting Plate
• Torx Screws